DisplayGrph_logo

This page require Adobe Flash 9.0 (or higher) plug in.

Mohawk In-Ground Heavy Duty Lifts

MOHAWK IN-GROUND LIFTS FROM STENHOJ

HEAVY DUTY – Stenhoj Multiflex 230-450 High Pressure In-ground lift

55,000, 66,000, 82,500 & 99,000lb. Capacities. The heaviest capacity lifts in the industry.

 

stenhojLR

 

 

 

stenhoj_fireLR

 

 

stenhoj_dumpLR

 

The high pressure, low volume lift that started it all, developed and installed in 1981.

Before environmental concerns were the hot topic Stenhoj saw the advantages of a continuous trench low oil volume design. Some companies claim they have been building high pressure lifts for many years, but no one has built a highpressure low volume self-contained lift longer than Stenhoj.

A single concrete vault to houses both front and rear pistons to assure that all service and repairs can be done from the top with out the need to dig. There are no concerns about rusting walls or moisture attacking the lifts structure. The lift was designed to be simple to install, simple to operate and simple to maintain.

Stenhoj uses a single high pressure piston housed in a massive outer chrome casing that slides in a lubricated top bearing for rigidity and stability under the highest load. This simple design is not dependent on multiple cylinders or lifting stages which add to your overall maintenance costs in the future.

With just 6 gallons per cylinder, multiflexuses the lowest amount of oil of any other lift design andits exclusive high pressure design assures years of trouble free service.

All cylinders and lock bars are fully chrome plated to insure surviving the elements while offering superior corrosions protection. The locking system is fully hydraulic and operates automatically whenever the power unit is activated. This means that there are no air cylinders to rely on for lift safety or to present a service issue in the future.

 

Quality to the last detail

• Hydraulic geared motor for movement of front cylinder

• Rear cylinder is equipped with a cover plate, which assures the rear piston is completely covered in the lowered position

• One or two movable cylinders for easy adjustment to accommodate different wheel bases

• External hard-chrome plated safety leg on eachcylinder

• For operator safety, the shutter plates move to continually cover the pit

• Operated from a remote control, the lift can be adjusted for wheel bases and also raised or lowered.

• Concrete containment vault 8" thick walls (will not detereriorate from electrolysis or rust).



 
Search
Total Tool Video

graphic_video
Contact Us

Total Tool
10 Kids Lane

Castleton, NY 12033

Phone: 518-766-7676
Fax: 518-766-4051
Toll Free: 1-800-677-8685

info@total-tool.com